|
 Sauer-Danfoss
offers transmission solutions for off-highway vehicles, both
at component and system levels. Our product range makes it
possible to cover low-, medium- and high-powered applications
with single and dual path propulsion drives as well as closed
loop auxiliary transmissions. Electronic controls from Sauer-Danfoss
can be used in a wide range of mobile applications. The Sauer-Danfoss
product portfolio consists of standardized products as well
as customer- and application-tailored solutions.
Hydrostatic
transmission solutions
For low and medium powered vehicles such as aerial lifts,
skid steer loaders, walk-behind rollers and industrial forklift
trucks, and for high powered vehicles like combines, crawlers,
forestry machinery and rollers, Sauer-Danfoss offers the
right hydrostatic transmission solutions.
|
 H1 - The New Generation of Hydrostatics
Optimized for electro-hydraulic control
Designed for improved operating efficiencies
Designed for short length
and compact installation
|
| |
Axial piston variable displacement single and tandem pumps
- 7 displacements
- 2 integral tandem displacements
- Maximum operating pressures up to 480 bar [6962 psi]
Bent axis variable displacement motors
- Zero degree motor angle capability
- Electric 2-position or electric proportional control
- Higher corner HP/package size ratio
|
Axial piston variable displacement single and tandem pumps
(Series 40 and 42)
|
| |
- Robust and easily serviced
- 7 different displacements
- Complete family of control systems
- Through drives for auxiliary pumps
- Pressures up to 350 bar (5076 psi)
for Series 40
- Pressures up to 450 bar (6019 psi)
for Series 42
|
Axial
piston two-position LV-motors
|
| |
- 3 different displacements in one compact package
- Short length & Compact design
- 3:1 working displacement ratio
- Zero displacement (degree) capability
|
|
Axial piston variable displacement pumps (Series 90)
|
| |
- Highest through-drive capability
- High power
- The most technically advanced hydraulic units in the
industry
- 6 different displacements
 Complete
family of control systems
- manual displacement controls (MDC)
- electrical displacement controls (EDC)
- hydraulic displacement controls (HDC)
- electrical automotive controls (NFPE)
- Compact and lightweight
- Closed circuit
- Pressures up to 480 bar (6962 psi)
|
Axial piston fixed and variable displacement motors (Series 90)
|
| |
- Cartridge motors designed for direct installation in compact planetary drives
- 5 sizes of fixed displacement motors in SAE-flange configuration
- 2 sizes of fixed displacement motors in cartridge configuration
- 2 sizes of variable displacement motors in SAE-flange
and cartridge configuration
- Variable motor with 3:1 displacement ratio
- Variable motors available with electrohydraulic or hydraulic
two- position control
- Short length
- Pressures to 480 bar (6962 psi)
|
Bent axis variable displacement motors (Series 51 and 51-1)
|
| |
 |
-
Advanced technology
- 4 sizes in SAE, DIN ISO, and cartridge flange configurations,
60 cc/rev (3.7 cu-in/rev) to 160 cc/rev (9.8 cu-in/rev)
- Cartridge motors designed for direct installation in
compact planetary drives
- Large displacement ratio (5:1)
- Pressure-compensated and two-position controls available
- Compact and lightweight
- Speeds to 7000 rpm
- Pressures to 480 bar (6962 psi)
|
|
|
Axial
piston variable displacement pumps (Bamtum Duty Series)
This product is minimum-sized hydrostatic transmission
applying for 3-20 PS engine power vehicle. This transmission
is a combination of axial piston type variable displacement pump
and fixed displacement motor. Main application is propel system
for small-sized lawn care vehicles, snow blowers, and agricultural
machines.
|
| |
- Three frame sizes; 6, 10, and 21 cm3
- Three sizes of pumps and motors in one unit
- Easy operation with one-lever control
- Compact, lightweight and high efficiency
- Fan cooling system without oil cooler
|
Compact
Drives
(BM Series & BMV Series)
This product was developed mainly for compact
track drives for mobile applications. It is the integrated wheel
motor of Hydraulic motor and series planetary gearing. We have
two types: BM type for fixed displacement motor
and BMV for variable displacement. |
| |
- Integrated type of hydraulic motor and planetary gear
- Six sizes of variable and fixed axial piston motors 41
to 227 cm3 and gear boxes
(equivalent displacement: 450cc/rev.-7500cc/rev.)
- Parking brakes with full input torque capability
- Compact design and high reliability
|
Radial
Piston Motors, Cam Ring Design (DCM Series)
This product is a low-speed, high-torque motor
with multi-stroke pistons. The DCM type was designed mainly for
propel system of mobile.
|
| |
- Radial piston motor of the multi-cam design
- High radial load capability
- High output torque even from low speed rotation (smooth
running and high efficiency even at very low speeds)
- Choice of six displacements per size
- Parking brakes with 130% of max.
output torque
|
